{
  "profile_name": "Sauron Survey Wing / Bambu Studio starter",
  "aircraft": "Survey Wing",
  "slicer": "Bambu Studio",
  "profile_type": "starter_process_profile",
  "compatible_filaments": ["LW-PLA", "LW-ASA", "PA6-CF"],
  "recommended_use": {"LW-PLA": "large lightweight wing and fuselage sections", "LW-ASA": "UV-exposed skins and service panels", "PA6-CF": "motor mounts, spars, and structural brackets"},
  "settings": {"nozzle_mm": 0.4, "layer_height_mm": 0.2, "walls": 2, "top_bottom_layers": 4, "infill_percent": 10, "supports": "minimal; orient long shells along the bed", "brim": "8 mm for long sections"},
  "validation": "Dry filament and tune expansion across the long wing sections. PA6-CF requires a hardened nozzle and dry filament path.",
  "flight_status": "Fabrication starter only; final geometry and flight validation are pending."
}