{
  "profile_name": "Sauron Long Range Drone / Bambu Studio starter",
  "aircraft": "Long Range Drone",
  "slicer": "Bambu Studio",
  "profile_type": "starter_process_profile",
  "compatible_filaments": ["LW-PLA", "LW-ASA", "PA6-CF"],
  "recommended_use": {"LW-PLA": "lightweight primary airframe", "LW-ASA": "weather-exposed skins and covers", "PA6-CF": "motor mounts and load-bearing hardware"},
  "settings": {"nozzle_mm": 0.4, "layer_height_mm": 0.2, "walls": 2, "top_bottom_layers": 4, "infill_percent": 12, "supports": "minimal; orient shells to avoid supports", "brim": "6 mm where needed"},
  "validation": "Dry filament and calibrate LW expansion for the selected brand. PA6-CF requires a hardened nozzle and dry box.",
  "flight_status": "Fabrication starter only; final geometry and flight validation are pending."
}